Neodymium Block Magnets › Countersunk Block Magnets
Engineered rectangular and square rare-earth magnets featuring pre-drilled 90° countersunk fastener holes for flush mechanical mounting with flat-head screws. Sintered from high-energy NdFeB alloys, these screw-mount blocks deliver superior holding force in cabinetry closures, heavy-duty sliding door latches, retail signage, and custom industrial fabrication fixtures without protruding hardware.
Centered flush mounting for single-screw fastening and pivoting latches.
Dual screw mounts for long bars to prevent rotational torque and slipping.
Maximum energy density (52 MGOe) for heavy holding power in tight spaces.
Configured specifically for direct magnet-to-magnet "snap" latch closures.
Neodymium (NdFeB) is a hard, brittle sintered material, making post-production drilling or machining into a standard magnet block virtually impossible without fracturing the alloy or ruining its plating. Our pre-formed Countersunk Block Magnets solve this by molding precision bevel-beveled holes directly into the block prior to sintering and magnetizing, allowing for clean mechanical screw mounting to wood, plastic, aluminum, or non-magnetic metal frames.
When installing countersunk rare earth block magnets, proper polarity orientation depends entirely on the mating surface:
While removing central material slightly reduces total magnetic volume, the concentrated flux density across the remaining solid face combined with rigid screw anchor mechanical stability provides superior practical holding performance.
Standard triple-layer Nickel (Ni+Cu+Ni) plating is intended for dry indoor environments. For outdoor projects exposed to moisture, we recommend choosing epoxy-coated or rubber-encapsulated variants to prevent oxidation.
Never pull countersunk blocks straight apart, especially high-energy N52 grades that exert over 40 lbs of pull force. Always slide the magnets laterally off one another along their flat surfaces.