Tel: 972-516-0692
Easy Return Policy
satisfaction guaranteed
satisfaction guaranteed
Premium Products
we guarantee our quality
we guarantee our quality
100% Safe Shopping
256 bit SSL encryption
256 bit SSL encryption
Shop By Category
Shop By Brand
Shop By Brand
Rubber Coated
High-Shear Anti-Slip Magnetic Mounts
Rubber Coated Neodymium Cup Magnets (Anti-Slip Pot Magnets)
CMS Magnetics engineers commercial-grade rubber coated neodymium cup magnets (protective pot magnets), designed for non-marring, scratch-free magnetic mounting on delicate painted steel, automotive body panels, and architectural glass. Encapsulated in heavy-duty vulcanized Santoprene® rubber or black elastomer, these specialized magnetic bases drastically elevate the friction coefficient to resist vertical shear sliding while shielding the internal sintered NdFeB multi-pole core from corrosion, water ingress, and mechanical chipping.
Looking for raw metal-on-metal clamping, bare discs, or cable mounts? If non-slip rubber is not required and you need maximum direct pull force, explore our bare steel Neodymium Cup Magnets. For flush screw-fastening into wood or non-metallic frames, view our Countersunk Discs, or return to our primary Neodymium Magnets department to source unjacketed raw discs, blocks, and rings.
High Shear Slip Resistance
Rubber surface drastically increases friction, resisting sideways slide on vertical steel walls.
Scratch & Mar-Free Contact
Cushions delicate automotive paint, powder-coat finishes, and glass panels from metal abrasions.
IP67 Waterproof Sealing
Fully jacketed elastomer blocks moisture, salt spray, and road grime from reaching the NdFeB alloy.
Multiple Thread Mounts
Available with male threaded studs, female threaded bushings, or central countersunk clearance holes.
Technical Reference • Shear Friction, Thread Standards & Weatherproofing
Engineering Guide to Rubber Coated Pot Magnets: Shear Force vs. Tensile Pull
Standard raw steel cup magnets provide exceptional perpendicular (tensile) holding power when attached directly to flat carbon steel. However, when mounted on vertical steel surfaces, a bare metal-on-metal interface suffers from a low friction coefficient (μ ≈ 0.15–0.20), causing the magnet to slide downward under as little as 15% to 20% of its rated pull load. Rubber coated neodymium cup magnets solve this critical physical limitation by pairing a multi-pole NdFeB magnetic circuit with an exterior elastomer jacket.
| Magnet Base Type | Surface Friction (μ) | Vertical Shear Efficiency | Surface Protection | Environmental Resistance |
|---|---|---|---|---|
| Bare Steel Cup Magnet | Low (μ ≈ 0.15) | 15% – 20% of rated pull | Risk of scratching paint | Indoor only (edges chip in weather) |
| Rubber Coated Pot Magnet | High (μ ≈ 0.60–0.75) | 50% – 70% of rated pull | 100% scratch-free & non-marring | Waterproof, UV & outdoor salt spray resistant |
Mechanical Mounting Options & Thread Fasteners
CMS Magnetics produces rubber coated mounting bases configured with standard imperial and metric mechanical fasteners to integrate directly with lighting fixtures, surveillance cameras, antenna brackets, and solar accessories:
- Male Threaded Stud (M4, M6, M8, 1/4"-20): Features an external protruding threaded bolt designed to bolt directly through brackets, LED light bars, and off-road vehicle roof mounts secured with a lock nut.
- Female Threaded Bushing (Internal Thread): Features a flush threaded collar accepting machine screws and camera ball-head tripod mounts (1/4"-20 standard).
- Countersunk Center Bore: Formed with a 90° chamfer hole through the center of the rubber jacket to accept flat-head mechanical fasteners for direct permanent mounting to non-metallic backplates.
Popular Commercial & Automotive Applications
Automotive & Fleet Vehicles
Mounting rooftop emergency lights, taxi beacons, fleet antennas, and auxiliary LED off-road bars without drilling holes into clear-coat paint.
Commercial Signage & Retail Display
Securing temporary promotional graphics, steel door signs, and POP retail displays without leaving scuffs or residue.
Industrial Vision & Security Cameras
Instant temporary fixturing for wireless surveillance cameras, optical inspection sensors, and laser leveling gear on structural steel beams.