Neodymium Disc Magnets › Large Discs (> 1 in.)
Heavy-duty industrial rare earth neodymium disc and cylinder magnets with diameters exceeding 1 inch (25.4 mm). Sintered from high-grade NdFeB alloys ($N35$ to $N52$), these large circular discs and thick cylindrical rods deliver immense magnetic field penetration and holding force ranging from 7 lbs up to an impressive 640 lbs.
Direct clamping capability from 7 lbs up to 640 lbs for heavy industrial lifting.
Ideal for magnetic sweepers, motor rotors, workholding, and tramp metal extraction.
Precision machined to strict ±0.002 in. dimensional tolerances across all profiles.
Stocked in standard thickness magnetization as well as side-magnetized configurations.
Large neodymium disc and cylinder magnets measuring greater than 1 inch in diameter (25.4 mm+) represent the heavy-duty power tier within our primary Neodymium Disc Magnets catalog. Manufactured under ISO 9001 quality systems with strict manufacturing tolerances of ±0.002 in. ( ±0.05 mm ), these high-volume sintered NdFeB circular magnets provide maximum energy product ( BHmax ) and deep field reach. Featuring residual flux densities between 13,500 and 14,400 Gauss (1.35 to 1.44 Tesla), they are engineered specifically for high-load industrial machinery, magnetic separation systems, and workholding fixtures.
To guard against oxidation, all stock large discs and cylinders are protected with a heavy-duty triple-layer Nickel-Copper-Nickel (Ni+Cu+Ni) metallic plating rated for dry operating conditions up to 176°F (80°C). Specialty epoxy-coated and rubber-encapsulated variants are available for high-humidity or outdoor marine applications.
Severe Pinch & Crush Hazard Warning: Large neodymium discs pull toward ferrous surfaces with immense velocity and holding forces up to 640 lbs. Never allow large discs to snap together freely, as the impact will shatter the brittle ceramic alloy and can cause severe crushing injuries or bone fractures. Always wear heavy protective leather gloves and safety glasses, keep non-magnetic wooden spacers between stored magnets, and slide discs apart laterally off a stack rather than pulling straight apart. Keep well clear of pacemakers, sensitive electronic control panels, and magnetic media.
This subcategory includes circular rare earth neodymium disc and rod cylinder magnets with outer diameters exceeding 1 inch ( 25.4 mm ), ranging up to multi-inch heavy industrial profiles.
Disc and cylinder magnets feature a circular geometry designed for round housing bores, rotational motor assemblies, and flush cylindrical pockets. For flat rectangular channels or anti-pivot requirements, explore our Neodymium Block Magnets category.
No. Sintered NdFeB is extremely hard and brittle. Attempting to drill, cut, or grind a large magnet will shatter the material, ruin its protective plating, and produce hazardous, flammable rare-earth dust.
Standard grade large NdFeB discs have a maximum operating temperature of 176°F (80°C). For elevated temperature industrial machinery, custom high-coercivity grades ( N42SH, N45H ) should be selected.