• Nominal Battery Voltages: 12, 24, 36, 48, or 60 VDC (Single model - selectable via field programming at start-up)
• Maximum Output Current: 80 amps @ 104° F (40°C) with adjustable current limit
• Maximum Solar Array STC Nameplate: 12 VDC systems 1250 Watts / 24 VDC systems 2500 Watts / 48 VDC systems 5000 Watts / 60 VDC systems 6250 Watts
• NEC Recommended Solar Array STC Nameplate: 12 VDC systems 1000 Watts / 24 VDC systems 2000 Watts / 48 VDC systems 4000 Watts / 60 VDC Systems 5000 Watts
• PV Open Circuit Voltage (VOC): 150 VDC absolute maximum coldest conditions / 145 VDC start-up and operating maximum
• Standby Power Consumption: Less than 1 Watt typical
• Power Conversion Efficiency: 97.5% @ 80 Amps in a 48 VDC System - Typical
• Charging Regulation: Five Stages- Bulk, Absorption, Float, Silent and Equalization
• Voltage Regulation Set points: 10 to 80 VDC user adjustable with password protection
• Equalization Charging: Programmable Voltage Setpoint and Duration - Automatic Termination when completed
• Battery Temperature Compensation: Automatic with optional RTS installed / 5.0 mV per °C per 2V battery cell
• Voltage Step-Down Capability: Can charge a lower voltage battery from a higher voltage PV array - Max 150 VDC input
• Programmable Auxilary Control Output: 12 VDC output signal which can be programmed for different control applications (Maximum of 0.2 amps DC)
• Status Display: 3.1" (8 cm) backlit LCD screen - 4 lines with 80 alphanumeric characters total
• Remote Display and Controller: Optional Mate or Mate2 with RS232 Serial Communications Port
• Network Cabeling: Proprietary network system using RJ 45 Modular Connectors with CAT 5e Cable (8 wires)
• Data Logging: Last 128 days of Operation - Amp Hours, Watt Hours, Time in Float , Peak Watts, Amps, Solar Array Voltage, Max Battery Voltage Min Battery Voltage and Absorb for each day along with total Accumulated Amp Hours, and kW Hours of production
• Hydro Turbine Applications: Consult factory for approved Turbines
• Positive Ground Applications: Requires two Pole Breakers for switching both positive and Negative Conductors on both Solar Array and Battery Connections (HUB-4 and HUB-10 can not be used for use in positive ground applications)
• Operating Temperature Range: Minimum -40° to maximum 60° C (Power capacity of the controller is automatically derated when operated above 40° C)
• Environmental Rating: Indoor Type 1
• Conduit Knockouts: One 1" (35mm)on the back; One 1" (35mm) on the left side; Two 1" (35mm) on the bottom
• Warranty: Standard 5 year / Available 10 Year
• Weight - Unit 12.20 lbs (5.56 kg)
• Dimensions - Unit 16.25" x 5.75" x 4" (41.3 x 14 x 10 cm) - (H x W x D)
• Options: Remote Temperature Sensor (RTS), HUB 4, HUB 10, MATE, MATE 2
• Menu Languages: English & Spanish