2KW Low Wind Speed Wind Generator System Designed for Home & Business.

Description: PowerMax 2 KW Wind Generator System. CE certified and qualified for federal credit.

The robust design and fine finish make this wind turbine comparable with USA made products but at a fractional cost. The cast aluminum shell reduces its weight to the lowest. The generator is so powerful and well engineered that it can generate 2KW power at around 20 mph wind.

Features:

Grid-Tie Ready: With Outback GVFX3648, this system can be set up as grid-tied with battery backup which will sell excess power to the grid and power your own appliance at the same time.

Powerful: The nominal wind speed is only 20 mph which is significantly lower than most of the models on the market (typically from 26mph-29mph) . For the same wind speed, this system gives you much more power than the other systems. This is the result of a low torque and low wind speed design. The system was designed to start at 4.5 mph wind which is lower than class 3. Comparing with most systems on the market, this system gives you 28% more power on average. (Note: The rated wind speed is very important since the actual power you get depends on the rated wind speed. The lower the rated wind speed, the more power you will get.)

Reliable: Dual speed control mechanisms are adopted. Unlike most of the other systems on the market which have only one speed control method, this system adopts 2 mechanisms to control the RPM, i.e. the mechanical tail furling mechanism and the electronic load brake (Also called as electromagnetic brake, but is not a right terminology). So far the mechanical RPM control is still the most reliable way since it can limit the power generated at the high wind. But the electronic load brake has no way to reduce the power generated by the generator, instead it simply burns out the extra energy on the dummy load which actually may burn the electronic system when the wind is very strong. The tail furling mechanism has been used for tens of years by the numerous wind mills all over the world and so far is proved to be the most reliable and least maintenance way to control the RPM.

High Efficient: The fiber glass wind blades in the system are manually made using aerodynamically designed moulds so it can provide top performance and quiet operation. Unlike machine made blades which are too thin to achieve aerodynamic performance, the manually made blades are hollow and conform to the airfoil easily. This means a better system performance.

This system is good for home and small business owners who want to try to offset his electrical bill. Before making the purchase, please consult with your city and HOA for the permission.

Items Included: Generator, blades, Hub and Nose Cone, tail, electrical cable, controller and installation manual.

Warranty: The wind generator is covered by 2 year factory warranty and the controller has only one year warranty. 5 year optional warranty available.

Return Policy: 30 day money back guaranty.